Drag instruction for fishing reels

About Drag
The drag system on reels allows line to come off the spool while fighting a fish. This will prevent the line from breaking if the fish makes a strong run. The drag lets the spool turn and release line until the fish slows down, without giving the fish slack line that might help it get off the hook. To work well, a drag must allow line to come off the spool smoothly and consistently while the reel is in gear.

Bait-Casting Reel Drag:
Bait-casting reels usually have a star drag that is controlled by a star-shaped fitting under the handle. It’s made up of different kinds of washers inside the reel that rub against each other as the spool turns while the reel is in gear. They can be very large and the drag system on bait-casting reels is usually smooth and consistent.
You can also control the drag on a bait-casting reel by using your thumb against the spool and putting the reel into free spool. Pressure of your thumb on the spool acts as the drag and controls the amount of pull that’s needed to take line.

Spinning Reel Drag:
Spinning reels come with either front or rear drag systems that are made up of alternating metal and fiber or plastic washers that work against each other. Front-drag reels have bigger washers and are smoother but are harder to adjust during the fight. Rear-drag reels are easy to adjust but have smaller washers, meaning they are not as smooth. Anglers need to adjust the drag when fighting a strong fish because as line comes off the spool the drag gets tighter as the amount of line on the spool gets smaller.

Spincast Reels Drag:
Spin-casting reels usually have a poor drag system because their construction makes it difficult to design a drag system that works well. The spool must turn inside the reel to allow line to come out, and the angle the line makes going around the edge of the spool and out the hole in the cover fights against a smooth drag. The drag usually consists of a small tab that works against notches in the side of the reel. The spool moves in jerks between notches and is not consistent.