If you would like to try your hand at working heavy cover, flipping
or pitching, chasing big fish, or throwing heavy lures, Goture
recommends you the
fishing baitcast reels, it is work better than fishing spinning reels.
First
to know the simple definition for baitcaster reel, it has a revoling
spool and sits on top of a casting rod with a trigger handle. This is
exactly opposite to a spinning reel, which sits underneath a spinning
rod and with the line guides facing down.
Fishing
baitcast reels designed with both left and right handle model, Many
right handed people use right handed reels. However, with this set up,
after a cast is made, the reel is placed in your left and the handle is
cranked with your right hand. It is the exact opposite for a left handed
model. For those that don't want to switch hands, choosing a
configuration the same as your
fishing spinning reel set up may be the best choice.
Following is the fishing baitcast reels guide
Braking Systems 
Baitcast reels come equipped with braking systems. These adjust and slow down the rotation of the spool during the cast.
The
spool tension knob is your first line of offense for adjusting spool
speed. It is the large knob found on the reel handle side. Tighten this
knob enough, so that when you disengage the reel, your lure will slowly
fall to the ground. Once it makes contact, the spool should stop
revolving almost immediately. The heavier the lure, the tighter the
tension should be.
Centrifugal brakes are friction based, and
utilize pins inside the side plate of the reel to make adjustments. To
engage the brakes, push the pins outward. For a six-pin system, always
adjust pins that are across from each other. Both should be either on or
off.
No matter what breaking system a reel has, learning to thumb
the spool correctly is still your best bet for trouble-free casting.
Fine tune each time you're on the water with the various breaking
systems, but let your thumb do most of the real work.
Gear ratio
All reels have a gear ratio, it is mean the speed of the reel. When you
select one baitcast reel, you will see 5.4:1, 6.4:1, and 7.1:1.and do
you know what do these numbers mean? The first set of numbers lists how
many revolutions the spool makes for each turn of the reel handle. For
instance, with a 6.4:1 reel the spool will revolve 6.4 times with one
crank of the handle. The higher the number, the more line that can be
retrieved within the same amount of work.
Ball Bearings
Top of the line reels don't necessarily need to have a lot of bearings,
just quality ones. Inexpensive reels packed with "10" bearings will
often be of poor quality. Key words to look for are "shielded,"
"double-shielded" and "sealed bearings." These are the top players in
the bearing game.
Spools Capacity The
majority of baitcast reels come with an aluminum spool. High-end reels
are constructed from forged aluminum, whereas less expensive reels are
die-cast. Forged spools are more rigid and harder to scratch. Spools
with holes drilled in them are lighter in weight and are easier to stop
and start spinning. Most, other than the most inexpensive reels on the
market, have drilled spools.
Frames Come in
either aluminum or graphite, with the latter generally less expensive
and lighter in weight but not won't withstand much abuse as aluminum.
High-end reels are usually manufactured from one-piece aluminum frames.
Line guides
These are made from either titanium or ceramic, with the latter being
less expensive but can crack or break from alleviated abuse. High-end
reels are usually manufactured with titanium.
Handle Soft rubber knobs or those designed as oversized work better for many.
More
fishing tackle online for sale on Goture.com.
